Environmentally Panels That Save Energy



Plastic Dowel
Compementary - 08


Steel Nail Dowel
Compementary - 07


After the adhesive mortar is completely dry (at least 24 hours later), the doweling process is started. Factors such as the location of the building relative to the wind, the wind intensity, and the height of the building play a role in determining the number of anchors.

The purpose of doweling is to mechanically fix the plates to the walls and to prevent the plates from falling off over time

Generally, 6 dowels are applied per square meter. A very common application is the application of 1 dowel at the corners of the plate and 2 dowels in the middle of the plate.

All over Europe

On Time Delivery


Years of Industry Experience


Happy Customer


Completed Project



Heat Insulation and Energy Efficiency

Building corners are very affected by the wind in high buildings. For this reason, the number of dowels is increased in the corners of the building at high elevations. 8 meters height up to 6 pcs/m2 ; Up to 8-20 m. 8 pcs/m2 ; 20 meters and above 10 pcs/m2 dowels are applied. 10-15 cm to the edge on the building and window sides. Doweling is done by leaving a distance.

10-15 cm to the edge on the building and window sides. Doweling is done by leaving a distance.

Plastic nailed anchors are used on brick walls and plastic wide-headed dowels with steel nails are used on concrete surfaces. It should be ensured that the dowels are not produced from scrap plastic. Dowel at least 3 cm on the surface. should be fixed to a holding surface with a width of at least 6 cm on aerated concrete walls, at least 5 cm on brick walls, and at least 4 cm on concrete walls. The hole length is 1 cm from the dowel length. It should open long.

According to the applied board type, one of the Warm Dowel types is determined and the doweling process is performed.

Compementary - 08
Scroll to Top
Open chat
Warm International
Would you like us to help?